background image

4

G E N E R A L

INTRODUCTION

This fixture has been designed to perform reliably for years when the information in this manual are 

followed. Please read and understand all the instructions and guidelines carefully and thoroughly before 

operating this unit. This manual contains important information regarding safety, installation, use, and 

maintenance.
UNPACKING

Each fixture has been thoroughly tested and shipped in perfect operating condition. Carefully check 

the outer shipping carton for signs of any damage that may have occurred during shipping. If the 

outer carton appears to be damaged, carefully inspect the fixture for damage and be sure all included 

accessories have arrived intact. In the event damage has been found and/or parts are missing, please 

contact our customer support team for further instructions. Please do NOT return this fixture to your 

dealer without first contacting customer support at the number listed below. Please do NOT discard the 

outer shipping carton in the trash. Please recycle whenever possible.
CUSTOMER SUPPORT: Contact ADJ Service for any product related service and support needs. Also visit 

forums.adj.com

 with questions, comments or suggestions.

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-582-2941 | 

[email protected]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET 

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | 

[email protected]

REPLACEMENT PARTS please visit 

parts.adj.com

WARRANTY RETURNS

All returned service items, whether under warranty or not, must be freight pre-paid and accompanied 

by a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of 

the return package. A brief description of the problem as well as the R.A. number must also be written 

down on a piece of paper and included in the shipping container. If the unit is under warranty, you must 

provide a copy of your proof of purchase invoice. Items returned without an R.A. number clearly marked 

on the outside of the package will be refused and returned at customer’s expense. You may obtain an 

R.A. number by contacting customer support.

Содержание FLA120
























Отзывы: