ADJ ENC820, Руководство пользователя

Страница: 13 / 37

13
A C C E S S O RY I N S TA L L AT I O N
FROST FILTER
In order to install the included frost filter, find the latch located at the end of the light bar. Press down
on the latch, and continue to hold it down as the frost filter is inserted into place in the lens frame slot,
as shown in the illustration below. When the frost filter has been fully inserted, release the latch to
secure the frost filter in place.
LATCH
GLARE SHIELD
In order to install the included glare shield, begin by locating the three (3) screw holes located along
the long side of the lens frame. Align these lens frame holes with the holes on the glare shield, then
insert a screw through each hole. Tighten the screws to secure the glare shield in place.