ADJ ELIMINATOR Stinger Spot 30, Руководство пользователя

Страница: 10 / 22

10
I N S TA L L AT I O N
CLAMP INSTALLATION
This fixture features mounting clamp attachment points for the fitment of an omega bracket, as well
as a safety cable loop, located on the underside of the fixture base, as shown in the illustration below.
When mounting the fixture to a truss or any other suspended or overhead installation, be sure to se-
cure an appropriately rated clamp (not included) to the clamp attachment point and attach a sepa-
rate SAFETY CABLE of the appropriate safety rating to the safety cable rigging point.
SAFETY CABLE
ALWAYS ATTACH A SAFETY
CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE
THAT THE FIXTURE WILL NOT
FALL IF THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working load
limits, understanding the installation material being used, and periodic safety inspection of all installa-
tion material and the fixture itself. If you lack these qualifications, do not attempt to perform the instal-
lation yourself. Improper installation can result in bodily injury.
MOUNTING
CLAMP
ATTACHMENT
POINTS
SAFETY
CABLE LOOP