background image

7

S A F E T Y   G U I D E L I N E S

For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You 

Attempt To Install Or Operate This Unit!

•  Be sure to save the packing carton in the unlikely event the device has to be returned for service.

•  Do not spill water or other liquids into or on to the device. 

•  Be sure that the voltage of the power source matches the required voltage for the fixture(s) that you are 

running in conjunction with this device.

•  Do not open up the device for any reason. There are no user serviceable parts inside.

•  Never connect this device to a dimmer pack.

•  Do not attempt to operate this device if it has been damaged in any way.

•  Never operate this device with the cover removed.

•  To reduce the risk of electrical shock or fire, do not expose this device to rain or moisture.

•  Do not attempt to operate this device if the power cord has been frayed or broken. 

•  Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce 

the risk of electrical shock and fire in the event of an internal short.

•  Disconnect from main power before making any type of connection.

•  This flight case and charging system are intended for indoor use only. Use of these devices outdoors voids 

all warranties.

•  Always mount this unit in a safe and stable matter.

•  Please route your power cord out of the way of foot traffic. Power cords should be routed so they are not 

likely to be walked on, or pinched by items placed upon or against them

Maximum ambient operational temperature is 95

°

F (35

°

 C). It is important to also consider the ambient 

temperature restrictions of the fixture(s) that you are using in conjunction with this device. Do not oper-

ate when ambient temperature falls outside the acceptable range of this device or any fixtures that are 

being used in conjunction with this device!

Keep flammable materials away from this device and any fixture(s) that the device may be connected to!

The device should be serviced by qualified service personnel when:

A.  The power-supply cord or the plug has been damaged.

B.  Objects have fallen on, or liquid has been spilled into, the device.

C.  The flight case or charging devices have been exposed to rain or water.

D.  The appliance does not appear to operate normally or exhibits a marked change in performance.

Содержание ACCU-CABLE POWER BONE T1ED

















Отзывы: