Warranty
This product is guaranteed against any manufacturing defect, as defined
on the D.Lgs. February 2, 2002, No 24. In case of failure, please contact
the retailer where you purchased it. You can be found at
www.adj.it
for
standards guarantee.
Additional compliance information:
To obtain additional information about the compliance, go to ADJ website:
www.adj.it/certification
or contact the ADJ Customer Support to the
following e-mail address:
Made in China - Imported and distributed by IoT Tecnologie s.r.l.
Via della Comunicazione, 7 - 00030 San Cesareo (RM)
– ITALY
This product complies with the following directives:
• DIRECTIVE 2014/53/EU on the harmonisation of the laws
of the Member States relating to the making available on
the market of radio equipment;
• DIRECTIVE 2011/65/EU on the restriction of the use of
certain hazardous substances in electrical and electronic
equipment.
The declaration of conformity for this product is visible on
www.adj.it site, on the product page.
The symbol of the crossed out trash indicates that the
product, at the end of its useful life, must be treated
separately from domestic waste and must be taken to a
recycling center for electrical and electronic equipment or
delivered to the seller when buying a replacement. The
separate waste collection contributes in preventing possible
adverse effects on the environment and health and promote
the recovery of materials it is made. You are responsible for
assigning the equipment in question at the appropriate
waste disposal center. For more detailed information contact
your local waste disposal service or the shop where it was
purchased. Anyone who does not carry the product in a
recycling center for electrical and electronic waste shall be
punished with administrative penalty provided by law on the
illegal disposal of waste.
