Installations steps
Please check the following items before installation, if it is missing, please contact the
dealer.
•
4 ports PoE Ethernet Switch
1 pcs
•
Power adaptor
1pcs
•
AC power cable
1pcs
•
Accessory
1set
•
User manual
1pcs
Please follow the below installation steps
1)
Please turn off the signal power and display device power before installation, installation
with power will damage the transmission equipment;
2)
Use network cable connect PoE IP camera and 1 ~4 down link ports of product
respectively;
3)
Use a network cable connect equipment up link port and NVR or computer;
4)
Turn on the power of the equipment.
The pictures in this manual are for reference only. Please refer to the actual product for the
final product.
