
ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 8
Vizi Wash Z37
Installation
CLAMP INSTALLATION
Screw one clamp via a M12 screw and nut into the Omega bracket. Insert the quick-lock fasteners of
the Omega bracket into the respective holes of the fixture base plate. NOTE: The clamp must be
attached to the Omega Bracket before attaching the bracket to the fixture. Tighten the quick-
lock fasteners fully clockwise. Pull the safety-cable through one of the two rigging points located on
the bottom of the unit and over the trussing system or a safe fixation spot. Insert the end in the cara-
bine and tighten the safety screw. NOTE: It is easier to pull the safety-cable through the rigging
points before attaching the Omega brakets.
SAFETY CABLE
RIGGING POINT
SAFETY CABLE
RIGGING POINT
OMEGA BRACKET
ATTACHMENT POINTS
OMEGA BRACKET
QUICK-LOCK
FASTENERS
CLAMP
(Not Included)
1
2
OMEGA BRACKET
QUICK-LOCK
FASTENERS
CLAMPS
(Not Included)
SAFETY CABLE
3
Содержание 1226100374
Страница 1: ...User Instructions VIZI WASH Z37...
Страница 51: ...ADJ Products LLC www adj com Vizi Wash Z37 User Manual Page 49 Vizi Wash Z37 Dimensional Drawings NOT TO SCALE...
Страница 55: ......
Страница 56: ......