Ender 3 Belt Kit assembly manual
P a g e
5 | 43
Chapter 2
Disassembling ENDER 3
In order to get ready to install this kit, you have to disassembly various segments of the original
3d printer, this part will guide you through entire process of preparation and getting ready to
install new parts.
In this part of the process, various electrical components will be temporarily disconnected for
practical purposes, you have to install them later though.
*Please be aware some original parts will be discarded and won’t be installed.
Figure 3. Assembled Ender 3
Step 2.1
Remove spool holder
✓
Remove spool holder using allen key, spool holder is reused later, save it along with its
m4 screws and t-slot nuts.
Figure 4 Removing spool holder
