User Manual MIC 990
24
Issue 18.03.2021_00
Please note
The current date and Central European Time are pre-set.
9.2 Enabling and disabling a signal
This function allows you to switch off the „Signal“ aggregate at specific times during the day or night.
S
elect „Enabling signal” from the „Profiles“ list “ and a button „ON“ or „OFF“ will appear.
„OFF“
= Signal is completely disabled.
„ON“
= Signal function is enabled. This means that if the corresponding event happens, the relay
„Signal“ will switch. You can enter two additional times (from – to), putting a time limit on
the signal function.
Please note
With setting „00.00“ to „00.00“ the signal will be active all day.
Be aware
If a signal event transgresses a pre-programmed time lock interval, its state remains
unchanged.
For example: the alarm signal in enabled from 7 a.m. to 5 p.m
. Let’s assume the signal
comes on at 4.50 p.m., then it will remain on even beyond the time lock set for 5 p.m.
The same is true vice versa. If an alarm happens before 7 a.m. the signal will not come
on and will remain off even after 7a.m.
