Recording Setup
1 Connect the ADInstruments CODA
®
Monitor to the computer via
supplied USB cable.
2 Connect the leads of the Occlusion Cuff, VPR Cuff Sensor, RightTemp
sensors and warming pad to the ADInstruments CODA
®
Monitor.
3 Connect the ADInstruments CODA
®
Monitor to mains power via
supplied power cable.
4 The ADInstruments CODA
®
Monitor will turn on with its touchscreen
displaying a start display that is on standby until successful
recognition by LabChart software.
5 Double click on LabChart icon to open LabChart software.
6 Wait for LabChart’s device scan to successfully recognised the
CODA
®
Monitor, which is represented by a green tick next to
CODA
®
Monitor.
7 Select the CODA
®
Monitor device and click the
OK
button.
8 Open a New document in LabChart software, which will
automatically setup ten recording channels in Chart View.
Usage
