AD Instruments
_______________________________________________________________________________
©Copyright Abacanto Digital SA.
Manual de usuario AD6236P
19
beam with the applied target. Verify that the MONITOR
INDICATION lights when the target aligns with the beam.
2.
TOTAL MEASUREMENT
a.
Apply a reflective mark to the object being measured. Slide
the function switch to
“
TOT
”
position.
b.
Install the batteries and press measuring button, then you see
light beam line with the target, start measuring. The value
will add 1 as the object rotate a circle or passed one reflective
mark, herein, the total value will stored in the meter until
loosen the button.
c.
It will display total value as you press
“
MEM
”
button.
Accessories:
Carrying case 1pc
Reflecting tape marks length
600mm
Operation manual 1pc
Damproof accessories 1pc
Bolt bag 1pc
