Adhesive Dispensing TS710SG, Руководство пользователя

Страница: 5 / 10

First Steps
Step 1:
Unpack the shipping box and use the supplied delivery note to make sure all items
are present. If any items are missing or damaged, please contact us immediately.
Step 2:
Ensure the area where you are setting up the equipment is clean and follow safety
procedures of your adhesive Material Safety Data Sheet for safe handling.
Step 3:
Activate your one (1) year product warranty by filling in and returning by fax or email
the warranty card.
Insert Rod:
The gun is supplied with a suitable size plunger rod.
Align the flat end of the rod to the white gun end and
push in rod whilst pressing the white release button on
the top of the gun.
ote: ever push or pull the rod without
pressing the white release button or it will cause damage.
Pull the rod back as far as it will go to show the plunger
end next to the o-ring.
This gun accepts 10cc size syringe barrels with wide
flanges. Locate the syringe end to the gun flange, push
on fully and twist anti-clockwise into place. The barrel
will sit over the o-ring on the gun.
Setup
5