ADF Web HD67E16-A1, Руководство пользователя

Страница: 23 / 28

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual EtherCAT Slave / J1939
Document code: MN67E16_ENG Revision 1.000 Page 23 of 28
UPDATE DEVICE:
By pressing the “ Update Device ” button, it is possible to load the created
Configuration into the device; and also the Firmware, if necessary. This by using the
Ethernet port.
If you don’t know the actual IP address of the device you have to use this procedure:
Turn OFF the Device;
Put Dip1 of ‘Dip-Switch A’ in ON position;
Turn ON the device
Connect the Ethernet cable;
Insert the IP “ 192.168.2.205 ”;
Select which operations you want to do;
Press the “ Execute update firmware ” button to start the upload;
When all the operations are “OK” turn OFF the Device;
Put Dip1 of ‘Dip-Switch A’ in OFF position;
Turn ON the device.
If you know the actual IP address of the device, you have to use this procedure:
Turn ON the Device with the Ethernet cable inserted;
Insert the actual IP of the Converter;
Select which operations you want to do;
Press the “ Execute update firmware ” button to start the upload;
When all the operations are “OK” the device automatically goes at Normal Mode.
At this point the configuration/firmware on the device is correctly updated.
Figure 7: “Update device” windows