ADF Web HD67D03-B2-868MHz, Руководство пользователя

Страница: 22 / 29

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual LoRaWAN / Modbus TCP Master
Document code: MN67D03_ENG Revision 1.000 Page 22 of 29
M
ODBUS
W
RITE
The means of the fields are:
If the field “ Enable ” is checked, the
Modbus request is enabled;
In the field “ Slave IP Address ” the IP
address of the Modbus TCP device to
read is defined;
In the field “ Port ” the TCP port used
for the communication is defined;
In the field “ Slave ID ” the address of
the Modbus device that you have to
write is defined;
In the field “ Type ” the data type of the register to write is defined. It is possible to choose between the following:
o
Coil Status;
o
Holding Register.
In the field “ Address ” the start address of the register to be written is defined;
In the field “ NPoint ” the number of consecutive registers to be written is defined;
In the field “ Poll Time ” the delay time to make the request is defined;
If the field “ On Change ” is checked, the converter sends the writing request when the data from LoRaWAN side change value;
If the field “ On CMD ” is checked, the converter sends the writing request when the data from LoRaWAN is received;
In the field “ Max Error ” the number of consecutive errors that the converter waits before suspending the request is defined;
In the field “ Position ” the address of the internal array where taking the information is defined;
In the field “ Start Bit ” the starting bit of the first byte of the field “Position” is defined;
If the field “ Swap ” is checked, the data written the Modbus registers are swapped;
If the field “ Swap Word ” is checked, the Modbus words are swapped;
In the field “ Mnemonic ” the description for the request is defined.
Figure 5b: “Set Access  Modbus Write” window