Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EnOcean / J1939
Document code: MN67C66_ENG Revision 1.000 Page 17 of 30
SET COMMUNICATION:
By Pressing the “
Set Communication
” button from the main window for SW67C66
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “J1939” are:
In the field “
Baudrate
” the data rate of J1939 is defined;
In the field “
TimeOut Data
” a time is defined. When a J1939 message is not
received in this time, the data on EnOcean side are set to 0xFF;
If the field “
Enable Peer to Peer
” is checked, the gateway will mask the Source
Address of the J1939 messages received.
In the field “
ID Device J1939
” the ID of J1939 side of the converter is defined.
The means of the fields for “Ethernet” are:
In the fields “
IP Address
” the IP address for Ethernet side of the converter is
defined;
In the fields “
SubNet
Mask
” the SubNet Mask for Ethernet side of the converter
is defined;
In the fields “
Gateway
” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net.
Figure 3: “Set Communication” window
