Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EnOcean / NMEA2000
Document code: MN67C73_ENG Revision 1.000 Page 17 of 30
SET COMMUNICATION:
By Pressing the “
Set Communication
” button from the main window for SW67C73
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “NMEA 2000” are:
In the field “
Baudrate
” the data rate of NMEA2000 is defined;
In the field “
TimeOut Data
” a time is defined. When a NMEA2000 message is
not received in this time, the data on OPC UA side are set to 0xFF;
If the field “
Enable Peer to Peer
” is checked, the gateway will mask the Source
Address of the NMEA2000 messages received.
The means of the fields for “Ethernet” are:
In the fields “
IP Address
” the IP address for Ethernet side of the converter is
defined;
In the fields “
SubNet
Mask
” the SubNet Mask for Ethernet side of the converter
is defined;
In the fields “
Gateway
” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net.
Figure 3: “Set Communication” window