ADF Web HD67B08-2-B2, Руководство пользователя

Страница: 18 / 33

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual OPC UA Client / Serial
Document code: MN67B08_ENG Revision 1.001 Page 18 of 33
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, OPC UA and
Serial.
By Pressing the “
Set Communication ” button from the main window for SW67B08 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “OPC UA Client” are:
In the field “ IP Address ” the IP address for OPC UA side of the converter is defined;
In the field “ SubNet Mask ” the SubNet Mask for OPC UA side of the converter is
defined;
In the field “ Gateway ” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out
of the net;
In the field “ DNS ” the IP Address of the DNS server is defined. This feature can be
enabled or disabled pressing the Check Box field.
The means of the fields for “Serial” are:
In the field “ Serial ” the serial line to use for serial communication is defined;
In the field “ Baudrate ” the baudrate for the serial line is defined;
In the field “ Parity ” the parity of the serial line is defined;
In the field “ Stop Bits ” the number of Stop Bits is defined.
The means of the fields for “NTP (Network Time Protocol)” are:
In the field “ Server URL ” the URL or the IP Address of the NTP Server is defined;
In the field “ Poll Time (seconds) ” the polling time for the time synchronization is
defined.
Figure 3: “Set Communication” window