ADF Web HD67933-x-B2, Руководство пользователя

Страница: 27 / 36

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual Modbus Master / MQTT
Document code: MN67933_ENG Revision 1.001 Page 27 of 36
M
ODBUS
W
RITE
The means of the fields are:
If the field “ Enable ” is checked,
the Modbus request is enabled;
In the field “ Slave ID ” the
address of the Modbus device
that you have to write is
defined;
In the field “ Type ” the data
type of the register to write is
defined. It is possible to choose
between the following:
o
Coil Status;
o
Holding Register.
In the field “ Address ” the start address of the register to be written is defined;
In the field “ NPoint ” the number of consecutive registers to be written is defined;
In the field “ Poll Time ” the delay time to make the request is defined;
If the field “ On Change ” is checked, the converter sends the writing request when the data from MQTT side change value;
If the field “ On CMD ” is checked, the converter sends the writing request when the data from MQTT is received;
In the field “ Max Error ” the number of consecutive errors that the converter waits before suspending the request until the next
reboot is defined. If is set to ‘0’ this function is disabled;
In the field “ Position ” the address of the internal array where taking the information is defined;
In the field “ Start Bit ” the starting bit of the first byte of the field “Position” is defined;
If the field “ Swap ” is checked, the data written the Modbus registers are swapped;
In the field “ Mnemonic ” the description for the request is defined.
Figure 7b: “Set Access  Modbus Write” window