Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / HART Master
Document code: MN67908_ENG Revision 1.001 Page 24 of 32
Insert the IP Address configured in the converter;
Start the Scan by clicking on “Start Scan” button. The window will appear like below:
When the Scan is complete, the software will show the results. You can import the data by clicking on “OK” button after having
selected the required variables. The results will be displayed as below:
Figure 7b: “HART Scan” window
Figure 7c: “HART Scan” window
