Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
IO-Link / CAN
Document code: MN67866_ENG Revision 1.000 Page 21 of 40
SET COMMUNICATION:
This section defines the fundamental communication parameters of CAN.
By Pressing the “
Set Communication
” button from the main window for SW67866 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “IO-Link” are:
In the fields “
Select Device
” the type of IO-Link channels is defined;
The means of the fields for “CAN” are:
In the field “
Baudrate
” the baudrate for the CAN line is defined.
The means of the fields for the “Ethernet” section are:
In the fields “
IP ADDRESS
” the IP address of the converter is defined;
In the fields “
SUBNET
Mask
” the SubNet Mask of the converter is defined;
In the fields “
GATEWAY
” the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net.
Figure 3: “Set Communication” window
