ADF Web HD67850-B2-N, Руководство пользователя

Страница: 18 / 42

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual DALI / SNMP Agent
Document code: MN67850_ENG Revision 1.000 Pagina 18 di 42
SET SNMP ACCESS:
By pressing the “
Set SNMP Access ” button from the main window for SW67850 (Fig. 2) the “Set SNMP Access” window appears (Fig. 5). In
this section, it is possible to create the OIDs for SNMP side to read or write using GET and SET commands or to be sent as TRAP messages.
The window is divided into two tables, one for SNMP readings and one for SNMP writings.
The data of the columns in the “SNMP Read” have the following meanings:
If the field “ Enable ” is checked, the
SNMP OID is enabled;
In the field “ Community Name ” the
name of the Community is defined;
In the field “ Type ” the type of data of
the OID is defined (Octet String or
Integer);
If the field “ On Change ” is checked, the
OID is sent as Trap when the data from
DALI side change;
If the field “ On CMD ” is checked, the
OID is sent as Trap when the a DALI command is received;
If the field “ On Timer ” is checked, the OID is sent as Trap cyclically;
In the field “ Time (ms) ” the delay time for the Trap send is defined (if “On Timer” option is checked);
In the field “ Position ” the starting byte of the internal memory array where taking the data is defined;
In the field “ Start Bit ” the starting bit of the selected Position is defined;
In the field “ Num Bits/Bytes ” the dimension of the OID is defined. For ‘Int’ type the dimension is in bit, for ‘String’ type the
dimension is in bytes;
In the field “ Description ” the description/name of the OID is defined;
In the field “ IP Address ” the IP Address of the SNMP device where addressing the Trap message is defined. This field is used only
when ‘On Change’ or ‘On Timer’ option is checked;
In the field “ Conversion ” it is possible to select the data conversion to apply to the data;
In the field “ Mnemonic ” a brief description of the OID is defined.
Figure 5a: “Set SNMP Access -> SNMP Read” window