Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DALI / DeviceNet Slave
Document code: MN67837_ENG Revision 1.000 Pagina 17 di 40
SET COMMUNICATION:
This section define the fundamental communication parameters of DeviceNet and DALI buses.
By Pressing the “
Set Communication
” button from the main window for SW67837 (Fig. 2) the
window “Set Communication” appears (Fig. 3).
The means of the fields for “DeviceNet Slave” are:
In the field “
ID Device
” the DeviceNet ID for the converter is defined;
In the field “
Baudrate
” the data rate of the DeviceNet is defined;
In the fields “
Number Byte IN
” the number of input byte of the slave station is defined (fixed
to 132);
In the fields “
Number Byte Out
” the number of output byte of the slave station is defined
(calculated in relation to the connected DALI nodes).
The means of the fields for the “DALI” section are:
In the field “
DALI Console
Port
” the UDP port used for Ethernet communication is defined.
The means of the fields for the “Ethernet” section are:
In the field “
IP ADDRESS
” the IP address of the converter is defined;
In the field “
SUBNET
Mask
” the SubNet Mask is defined;
In the field “
GATEWAY
” the default gateway of the Ethernet network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going out of
the net.
Figure 3: “Set Communication” window
