ADF Web HD67803-KNX-B2, Руководство пользователя

Страница: 21 / 28

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual CAN / KNX
Document code: MN67803_ENG Revision 1.002 Pagina 21 di 28
SEND FRAMES:
By pressing the “
Send Frames ” button from the main window for SW67803 (Fig. 2) the “Send CAN frames” window appears (Fig. 6).
The COB inserted in this table contains the Input data of KNX. These frames are sent by the Converter.
The data of the columns have the following meanings:
In the field “ Cob-ID ” insert the COB of the CAN frame;
In the field “ Type ” is possible to select which type of CAN packet use for this Cob-ID; or 2.0A (11 bits) or 2.0B (29 bits);
In the field “ Dimension ” insert the number of byte of the COB (from 1 to 8);
If the field “ OnChange ” is checked, the frame is sent when the data from KNX change;
If the field “ OnTimer ” is checked, the frame is sent cyclically with the delay defined in the field “Time” (expressed in ms);
In the field “ Byte1 ” insert the address of the KNX array where taking 1st byte of the CAN message;
In the field “ Byte2 ” insert the address of the KNX array where taking 2nd byte of the CAN message;
In the field “ Byte3 ” insert the address of the KNX array where taking 3rd byte of the CAN message;
In the field “ Byte4 ” insert the address of the KNX array where taking 4th byte of the CAN message;
In the field “ Byte5 ” insert the address of the KNX array where taking 5th byte of the CAN message;
In the field “ Byte6 ” insert the address of the KNX array where taking 6th byte of the CAN message;
Figure 6: “Transmit CAN Frames Set Access” window