ADF Web HD67694-IP-B2-1-10, Руководство пользователя

Страница: 17 / 25

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual M-Bus / BACnet/IP
Document code: MN67694_ENG Revision 1.000 Page 17 of 25
M-BUS
By pressing the “
M-Bus ” button from the main
window for SW67694 (Fig. 2) the window “M-
Bus” appears (Fig. 4).
In this section, it is possible to select the
converter type and the list of nodes/variables of
M-Bus side.
The means of the fields are:
In the field “ Select Converter ” the
converter used is defined;
In the field “ Select Template ” the M-
Bus controller connected is defined;
In the field “ Description ” a description
for the node is defined;
In the field “ M-Bus ID Type ” the type
of polling (by Primary or Secondary
Address) is defined;
In the field “ M-Bus ID ” the ID of the M-
Bus controller is defined;
If the field “ Node State ” is checked, the
Status of the controller is mapped on
Modbus side;
If the field “ Identification Number ” is checked, the Secondary Address of the M-Bus controller is mapped on Modbus side;
In the field “ MSB (xx) ” the first part of the description of the M-Bus variable is defined;
In the field “ SST (yy) ” the second part of the description of the M-Bus variable is defined;
In the field “ Third Field (zzz) ” the third part of the description of the M-Bus variable is defined.
After that, pressing the “ ADD ” button, a new node appears in the “List of M-Bus Devices” table. In order to modify a created node it is
necessary to select the desired node, change the wrong items and then press the “ MODIFY ” button.
Figure 4: “M-Bus” window