Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EtherNet/IP / Modbus TCP Slave
Document code: MN67663_ENG Revision 1.000 Page 6 of 24
CHARACTERISTICS:
The HD67663-A1 is a EtherNet/IP / Modbus TCP Slave Converter.
It allows for the following characteristics:
Up to 500 bytes in reading and 500 bytes in writing;
Isolation between Modbus/EtherNet/IP - Power Supply;
Two-directional information between Modbus TCP bus and EtherNet/IP bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67663 software on your PC in order to perform the following:
Define the parameters of EtherNet/IP line;
Define the parameters of Modbus TCP line;
Define the Modbus TCP data that a master read and where to take these information in the EtherNet/IP array;
Define the Modbus TCP data that a master write and where to map these information in the EtherNet/IP array;
Update the device.
