ADF Web HD67659-A1, Руководство пользователя

Страница: 14 / 26

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual PROFINET Slave / Ethernet - Converter
Document code: MN67659_ENG Revision 1.000 Page 14 of 26
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, PROFINET and Ethernet.
By Pressing the “
Set Communication ” button from the main window for SW67659 (Fig. 2) the window
“Set Communication” appears (Fig. 3).
The means of the fields for “PROFINET” are:
In the field “ IP ADDRESS ” the IP address of PROFINET side of the converter is defined;
In the field “ SUBNET Mask ” the SubNet Mask of PROFINET side of the converter is defined;
In the field “ GATEWAY ” the default gateway of PROFINET network is defined. This feature can
be enabled or disabled pressing the check box. This feature is used for going out of the net;
In the field “ Port ” the port used for PROFINET communication is defined. The port has a fixed
value of 34964;
In the field " PROFINET Name of Station " the name of PROFINET side of the converter is
defined;
In the fields “ PROFINET  Gateway ” the number of input byte of the slave station is defined;
In the fields “ Gateway

PROFINET ” the number of output byte of the slave station is defined.
The means of the fields for “Ethernet” are:
In the field “ IP ADDRESS ” the IP address of Ethernet side of the converter is defined;
In the field “ SUBNET Mask ” the SubNet Mask of Ethernet side of the converter is defined;
In the field “ GATEWAY ” the default gateway of Ethernet network is defined. This feature can be
enabled or disabled pressing the check box. This feature is used for going out of the net;
In the field “ TCP Port ” the TCP port used to receive the Ethernet commands over TCP is
defined;
In the field “ UDP Port ” the UDP port used to receive the Ethernet commands over UDP is
defined.
Figure 3: “Set Communication”
window