ADF Web HD67616-422-A1, Руководство пользователя

Страница: 21 / 30

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual NMEA 0183 / Modbus Slave - Converter
Document code: MN67616_ENG Revision 1.000 Page 21 of 30
Figure 3d: “Set Communication  RS485” window
Figure 3e: “Set Communication  Ethernet”
window
RS485:
This section is used to define the main parameters of RS485 line. The means of the
fields are:
If the field “ Enable RS485 ” is checked, the serial port is enabled;
In the field “ Baudrate ” the baudrate for the serial line is defined;
In the field “ Parity ” the parity of the serial line is defined;
In the field “ Stop Bits ” the number of stop bits of the serial line is defined.
E
THERNET
:
The means of the fields for “Ethernet” are:
In the fields “ IP Address ” the IP address for Ethernet side of the converter is
defined;
In the fields “ SubNet Mask ” the SubNet Mask for Ethernet side of the converter
is defined;
In the fields “ Gateway ” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net.