Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
PROFINET / DeviceNet Slave
Document code: MN67609_ENG Revision 1.001 Pagina 13 di 22
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, PROFINET and
DeviceNet.
By Pressing the “
Set Communication
” button from the main window for SW67609 (Fig. 2) the
window “Set Communication” appears (Fig. 3).
The window is divided in two sections, one for the PROFINET and the other for the DeviceNet Slave.
The means of the fields for “PROFINET” are:
In the fields “
IP ADDRESS
” insert the IP address that you want to give to the Converter;
In the fields “
SUBNET
Mask
” insert the SubNet Mask;
In the fields “
GATEWAY
” insert the default gateway that you want to use. This feature can
be enabled or disabled pressing the Check Box field. This feature is used for going out of the
net;
In the field “
Port
” the port used for PROFINET communication is defined. The port has a
fixed value of 34964;
In the field "
PROFINET Name of Station
" is possible to assign a name to the PROFINET
node.
The means of the fields for the “DeviceNet Slave” section are:
In the field “
ID Device
” the address for the DeviceNet Slave is defined;
In the field “
Baudrate
” the velocity of the DeviceNet Slave bus is defined;
In the field “
Number Byte IN
” the number input bytes of DeviceNet Slave is defined (at max
455 bytes);
In the field “
Number Byte OUT
” the number output bytes of DeviceNet Slave is defined (at
max 455 bytes).
Figure 3: “Set Communication” window
