ADF Web HD67591-232-A1, Руководство пользователя

Страница: 15 / 23

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual Ethernet/IP / Modbus Master - Converter
Document code: MN67591_ENG Revision 1.001 Pagina 14 di 22
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, Ethernet/IP and
Serial.
By Pressing the “
Set Communication ” button from the main window for SW67591 (Fig. 2) the
window “Set Communication” appears (Fig. 3).
The window is divided in two sections, one for the Ethernet/IP and the other for the Serial.
The means of the fields for “Ethernet/IP” are:
In the fields “ IP ” insert the IP address that you want to give to the Converter;
In the fields “ SubNet Mask ” insert the SubNet Mask;
In the fields “ Default Gateway ” insert the default gateway that you want to use. This
feature can be enabled of disabled pressing the Check Box field;
In the field “ Port ” insert the number of port;
In the field " Number Byte Input " the number of byte from the Ethernet/IP to the
Converter is defined (at maximum it is possible to use 50 byte);
In the field " Number Byte Output " the number of byte from the Converter to the
Ethernet/IP is defined (at maximum it is possible to use 500 byte).
The means of the fields for “Serial” are:
In the field “ Serial ” the serial to use is defined (RS232 or RS485);
In the field “ Baud Rate ” the baudrate for the serial line is defined;
In the field “ Parity ” the parity of the serial line is defined;
In the field “ TimeOut ” there is the maximum time that the device attends for the answer
from the Slave interrogated;
In the field “ Cyclic Delay ” the delay between two requests is defined;
Figure 3: “Set Communication” window