Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus TCP Slave / Modbus Master
Document code: MN67508_ENG Revision 1.100 Page 19 of 28
If the field “
Fast StartUp (only 100Mb/s)
” is checked, the Converter take less time to go online. This command can use only if the
Converter is used in a 100Mb/s network;
The means for the fields of “Modbus Master” are the same for all the Device Type:
In the field “
Serial
” the type of serial port is defined;
In the field “
Baudrate
” the data rate of Modbus RTU is defined;
In the field “
Parity
” the parity of Modbus RTU is defined;
In the field “
Stop bits
” the number of Stop-Bit of Modbus RTU is defined;
In the field “
Data bits
” the number of Data Bit of Modbus RTU is defined;
In the field “
Timeout
” the maximum time that the converter attends for the answer from the Modbus slave interrogated is defined;
In the field “
Communication Idle Time (ms)
” the delay between the Modbus response from a slave and the following request is
defined;
In the field “
Time Between Bytes (ms)
” a custom delay between the bytes of Modbus frames can be set;
If the field “
Modbus Filter
” is checked, the wrong responses received from Modbus side are discharged.
