Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Master / Ethernet
Document code: MN67506_ENG Revision 1.012 Page 8 of 18
USE OF COMPOSITOR SW67506:
To configure the Converter, use the available software that runs with
Windows
called
SW67506.
It
is
downloadable
on
the
site
www.adfweb.com and its operation is described in this document.
(This
manual is referenced to the last version of the software present on our
web site)
. The software works with MSWindows (2000, XP, Vista, Seven,
8; 32/64bit).
When launching the SW67506 the right window appears (Fig. 3).
NEW PROJECT / OPEN PROJECT:
The “
New Project
” button creates the folder which contains the entire device configuration.
A device configuration can also be imported and exported:
To clone the configurations of a orogrammable ModBus / Ethernet Converterin order to configure another device in the same manner, it
is necessary to maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to duplicate the project folder with another name
and open the new folder with the button “
Open Project
”.
When a new project is created or an existent project is open, it will be possible to access the various configuration section of the Software.
Figure 3: Main window for SW67506