manualshive.com logo in svg

Adeunis RF Narrow Band NB868-500mW, Руководство пользователя

Поделиться
Скачать
Adeunis RF Narrow Band NB868-500mW Скачать руководство пользователя страница 2

NARROW BAND - NB868 - User guide version V2.2.5 - Software version V2.3.0

2

Page

of 25

Information

Document information
Title

NB868 Narrow Band module User guide

Subtitle

User guide version V2.2.5

Document type

Hardware integration and software management manual

Document status

Release for NARROW BAND software version V2.3.0

This document applies to the following products

Name

Reference

Firmware version

NB868-RTU

ARF7763BAB

V2.3.0

Labelling

Disclaimer

This document and the use of any information contained therein, is subject to the acceptance of the Adeunis RF terms and conditions. They can 
be downloaded from 

www.adeunis-rf.com

.

Adeunis RF makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make 
changes to specifications and product descriptions at any time without notice.

Adeunis RF reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without 
express permission is strictly prohibited. Copyright © 2012, Adeunis RF.
Adeunis RF is a registered trademark in the EU and other countries.

Technical Support

Website

Our website contains many useful information : modules and stand alone products information, user guides, configuration software and techni-
cal documents which can be accessed 24 hours a day.

Email

If you have technical problems or cannot find the required information in the provided documents, contact our Technical Support by email. Use 
our dedicated email address (

[email protected]

) rather than any personal email address of our staff. This makes sure that your request is 

processed as soon as possible.

Helpful Information when Contacting Technical Support

When contacting Technical Support please have the following information ready: 

• 

Complete product type & reference (e.g. Narrow Band NB868 - ARF7763BA), 

• 

Firmware version (e.g. V2.0.4) 

• 

Clear description of your question or the problem

• 

A short description of the application 

• 

Your complete contact details

CE compliancy

Usage restrictions

Product reference

Index

Batch number

Product name

868

3 B

Содержание Narrow Band NB868-500mW


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды