manualshive.com logo in svg

Adeunis RF LoRaWAN AS923 PULSE, Руководство пользователя, Страница: 26 / 27

Поделиться
Скачать
Adeunis RF LoRaWAN AS923 PULSE Скачать руководство пользователя страница 26

FR

EN

FIELD TEST DEVICE - LoRaWAN AS 923 - Mode d'emploi V1.0.0

26

Page

of 27

S221: Activation mode

This range will allow you to configure the device’s activation mode:
•  The “Over The Air Activation” (OTAA) mode uses a JOIN phase before it can transmit on the network. This mode uses the code APP_EUI 

(S214 and S215) and the code APP_KEY (S216 to S219) during this phase in order to create the network communication keys. Once this 
phase has finished, the APP_sKEY, NWK_sKEY and DEVICE ADDRESS codes will be present in the corresponding ranges. A new JOIN phase 
will start each time the device exits command mode, is reset or is supplied with power.

Code

Description

APP_EUI

Global application identifier

APP_KEY

Device application key

•  The “Activation By Personalization” (ABP) mode does not have a JOIN phase, but transmits directly on the network by directly using the 

codes NWK_sKEY (S222 to S225), APP_sKEY (S226 to S229) and DEVICE ADDRESS (S281) in order to communicate.

Data Rate (DR) value

Description

NWK_sKEY

Network session key

APP_sKEY

Application session key

DEVICE ADDRESS

Network device address

S222 à S225: LORA NWK_sKEY

The ranges from S222 to S225 determine the NWK_sKEY used during network exchanges. The key is made up of 32 characters spread across 
these 4 ranges, which can each contain 8 characters. The range S222 contains the first 8, the S223 range contains the next 8, the S224 regis-
ter contains the next 8 and the S225 range contains the last 8.

Example: 0018B244 41524632 0018B200 00000912

S216 = 0018B244
S217=  41524632
S218 = 0018B200
S219 = 00000912

S226 to S229: LORA APP_sKEY

The ranges from S226 to S229 determine the APP_sKEY used during network exchanges. The key is made up of 32 characters spread across 
these 4 ranges, which can each contain 8 characters. The S226 range contains the first 8, the S227 range contains the next 8, the S228 range 
contains the next 8 and the S229 range contains the next 8.

Example : 0018B244 41524632 0018B200 00000912

S216 = 0018B244
S217=  41524632
S218 = 0018B200
S219 = 00000912

S281: DEVICE ADDRESS

This range will allow you to determine the address of the device on the network when using the ABP mode. In the OTAA mode, this parame-
ter is automatically input during the JOIN phase.

Содержание LoRaWAN AS923 PULSE




























Отзывы:

Нет отзывов