HB1908K-SA
PAGE 8
E285
AFTER USE
When you have finished using the blender, disconnect the
•
power cable and dismantle the stem from the blender.
Immediately after use, follow the instructions in the Care and
•
Cleaning section to clean the components you used.
Storage
When all the components are dry, coil the power cable
•
loosely and store the blender set out of reach of children
and pets. The motor body includes a hanging loop if required,
never hang the appliance by the mains cable.
CARE AND CLEANING
Never clean any of the blender components with scourers,
abrasive pads or chemicals.
The blender components are not dishwasher safe.
Disconnect the blender motor body from mains power before
•
cleaning it and remove the stem.
Motor body
The motor body must never be immersed in water. Wipe it
•
with a damp cloth and dry thoroughly.
Blender stem
Wash the blender stem under hot, running water and stand it
•
vertically to drain. Dry thoroughly before storage.
NOTE: The stem may be damaged if submerged.
Jug
Hand-wash the jug in a mild detergent solution. Dry
•
thoroughly.
SPECIFICATIONS
Power supply ...........................................................220 - 240V~, 50Hz
Power consumption.................................................................... 200W
Class II double insulated.
