2-2
Usage
English
2.2 Using the Stylus Pen
This section describes how to use the CYBERTABLET M17 stylus pen.
2.2.1 How to Use the Stylus Pen
The stylus pen has a power switch. Battery life can be prolonged by ON/OFF the power
switch. To draw characters and figures using the stylus pen, set the power switch of the
stylus pen to the ON position.
2.2.2 Basic Stylus Pen Operations
The stylus pen can be used in the same way as a mouse. Under the stylus pen’s default
settings, the pen tip button is set to correspond to the left mouse button. When Windows
is open, the pen tip button may be used to perform the following mouse actions.
•
Clicking
Press the pen tip against the display with a suitable amount of force and then release it
quickly.
•
Double-clicking
Press the pen tip against the display with a suitable amount of force and then release it,
two times in a row.
•
Dragging
Press the pen tip against the display with a suitable amount of force and then move the
pen while keeping it pressed against the display (without releasing it from the display).
The permitted stylus pen input angle range is 30° in any direction from a position where
the stylus pen is perpendicular to the display surface. Note that if the pen is tilted at an
angle greater than 30°, its coordinates may not be input correctly.
OFF
ON
ON/OFF switch
Push the switch
