ADEO Services 951266, Сборка, использование, руководство по обслуживанию

Страница: 43 / 57

42
EN
SAFETY INSTRUCTIONS
ejected material could cause
injury.
e) Before using, always visually
inspect to see, that the shredding
means, shredding means bolts
and other fasteners are secure,
the housing is undamaged and
that guards and screens are in
place. Replace worn ordamaged
components in sets to preserve
balance. Replace damaged or
unreadable labels.
f) Before use check the supply and
extension cord for signs of damage
or aging. If the cord becomes
damaged during use, disconnect
the cord from the supply
immediately. DO NOT TOUCH THE
CORD BEFORE DISCONNECTING THE
SUPPLY. Do not use the machine if
the cord is damaged or worn.
g) Never operate the machine while
people, especially children, or pets
are nearby.
Operation
a) Before starting the machine, make
certain that the feeding chamber is
empty.
b) Keep your face and body away
from the feed intake opening.
c) Do not allow hands or any other
part of the body or clothing inside
the feeding chamber, discharge
chute, or near any moving part.
d) Keep proper balance and footing at
all times. Do not overreach. Never
stand at a higher level than the
base of the machine when feeding
material into it.
e) Always stand clear of the discharge
zone when operating this machine.
f) When feeding material into the
machine be extremely careful that
pieces of metal, rocks, bottles, cans
or other foreign objects are not
included.
g) If the cutting mechanism strikes
any foreign objects or if the
machine should start making
any unusual noise or vibration,
immediately shut off the power
source and allow the machine
to stop. Disconnect the machine
from the supply and take the
following steps before restarting
and operating the machine:
i) inspect for damage;
ii) replace or repair any damaged
parts;
iii) check for and tighten any loose
parts.
h) Do not allow processed material to
build up in the discharge zone; this
may prevent proper discharge and
can result in kickback of material