ADEO Services 3276004638199, Сборка, использование, руководство по обслуживанию

Страница: 51 / 56

51
EN
TROUBLE SHOOTING
Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the
product using this section. In most cases the problem can be solved quickly.
The product comes in a package that protects it against damage during shipping. Keep the
package until you are sure that all parts have been delivered and the product is function
properly. Recycle the package afterwards.
CAUTION! This product shall not be discarded with household waste but that it shall be
returned to a collection system which conforms to the European WEEE Directive. Contact your
local authorities or stockist for advice on recycling. It will then be recycled or dismantled in order
to reduce the impact on the environment. Electric and electronic equipment can be hazardous
for the environment and for human health since they contain hazardous substances.
Problem Possible cause Solution
Product does not start Not connected to power supply Connect to power supply
Power cord or plug is defective Check by a specialist electrician
Other electrical defect to the
product Check by a specialist electrician
Product does not reach full power Extension cord not suitable for
operation with this product
Use a proper extension cord
Power source (e.g. generator) has
too low voltage Connect to another power source
Air vents are blocked Clean the air vents
Unsatisfactory cutting
performance Saw chain not tensioned properly Tension properly
Blunt saw chain
Sharpen or replace the saw chain
Excessive vibration/noise Saw chain is dull/damaged Replace with a new one
Bolts/nuts are loosen Tighten bolts/nuts