Adeo Group s.r.l.
Via della Zarga n. 50 - 38015 LAVIS (TN)
Tel: +39 0461 248211 - Fax: +39 0461 245038
Mail: [email protected] – www.adeogroup.it
Adeo Control
SP-C4-1
Device Manual
Rev. 3.0
Pag. Pag.
4
/
8
A d e o C o n t r o l è u n b r a n d d i A d e o G r o u p s . r . l .
4.
Installation requirements
Super Plug
requires the following requirements to work correctly:
● A wall socket in Schuko format
● IEEE 802.11 n / g / b 2.4GHz WIFI network (whose name and access key must be known) with DHCP
enabled
● At least one Android device (version 4.1 or higher) or IOS (version 9.0 or higher) with the free Adeo
Control App installed, even just for the installation phase
5.
Registration in the wifi network
1
Download the
Adeo Control App
from
Android:
https://play.google.com/store/apps/details?id=it.adeogroup.superplug
Apple:
https://apps.apple.com/us/app/adeo-control-app/id1340429713
2
Make sure your smartphone is connected to the WIFI network where you want to install the
module
3
Press the + button on the bottom
4
Enter the password for your WIFI network
5
Press and hold the device configuration button for 6 seconds
6
Press Start Configuration
7
Wait a few seconds and enter a name for the device
8
Choose the type of device (between Super Plug or Super IO)
9
Press the Save and Close button
10
Device DVES will appear: DVES_XXXXXXXX, necessary for integration with Control4 (see
following pages)
For correct operation with the control devices that will be connected, it is recommended to associate a
static IP address to the device (instead of operating in DHCP). The device does not support static addressing
but you can apply the IP Reservation on your router (if supported).
During the procedure, which takes a few seconds, the LED of the plug flashes rapidly. In case of error, vice
versa, it is reported that no plug has been found; in this case, it is advisable to try again.
