Adeneo Embedded i.MX53, Руководство пользователя

Страница: 14 / 20

●
This will save the environment variables to the SD card. Restart the board and Android
will load.
●
Note: The backlight settings have been adjusted to support the SEIKO 4.3” LCD screen.
They might not be suitable for the 7” screen. If you want to use the 7” display:
○
Edit and find the following structure:
static struct platform_pwm_backlight_data mxc_pwm_backlight_data = {
.pwm_id = 1,
.max_brightness = 255,
.dft_brightness = 128,
/* NOTE - ADENEO: this value is suitable for the SEIKO LCD.
It needs to be adapted for different panels */
.pwm_period_ns = 5000000,
};
○
Set the PWM period: .pwm_period_ns = 50000,
○
Rebuild and flash the kernel.
VGA
●
Use the following commands in U-Boot:
U-Boot> setenv set_display run vga
U-Boot> save
●
This will save the environment variables to the SD card. Restart the board and Android
will load.
Note: If you need to customize the mode, you will need to edit the “ vga ” environment variable
and replace “video=mxcdi1fb:GBR24,VGA-XGA” with the desired mode, e.g.
U-Boot> setenv vga 'setenv bootargs ${bootargs} di1_primary
video=mxcdi1fb:GBR24,1680x1050@60 vga'
The following modes are supported:
○
1680x1050@60
○
1280x1024@60
○
1024x768@60
○
800x600p@60
HDMI
01/29/2012 Adeneo i.MX53 QSB BSP for Android Gingerbread 4.2
Page
14
/
20