ADENDORFF TRE-85, Руководство по эксплуатации

Страница: 7 / 32

- 7 -
4
、
Engine oil
a. Change the engine oil fresh oil (see page 10).
b. Remove the spark plug, pour about 5cc of engine oil into the
cylinder, slowly pull the starter handle of the recoil starter 2 or 3
times, and reinstall the spark plug.
5
、
Clean and store
a. Slowly pull the recoil starter handle until resistance is felt and
leave it in that position.
b. Clean the engines thoroughly with an oiled cloth, put the cover on,
and store the engine indoors in a well-ventilated, low humidity
area.
BEFORE OPERATION CHECKS
1. Check for leakage of gasoline and engine
oil.
2. Check engine oil
Notice! Running the engine with a low oil
level can cause engine damage.
a. Before checking or refilling engine oil, be sure the rammer is located
on a stable, level surface and stopped.
b. Remove the filler cap/dipstick and check
the oil level shown on the dipstick.
c. If the oil level is low, fill to the edge of the
oil filler hole with the recommended oil.
Oil capacity: 0.4L
SAE 10W-30 is recommended for general
use. Other viscosities shown in the chart
may be used when the average temperature in your area is with the
recommended range.
CAUTIONS! Use not depurative lubrication or 2-cycle lubrication can