ADENDORFF GCABSB-001, Инструкция по эксплуатации и список запасных частей

Страница: 7 / 8

Troubleshooting the SBC
PROBLEM
CAUSE
.REMEDY
Exhaust vent plugged or Clean rear vent and keep
air flow is blocked.
vent away from any
Fxcessive dust in the wall.
cabinet
Abrasive media worn.
Replace abrasive media
Too much abrasive media
Remove excess media
inside cabinet
Tighten fitting and make
Loose air line or fitting
sure air lines are secure.
connections
Too much abrasive media
Remove excess media
inside cabinet.
Uneven blasting
Moisture present inside the check air line to make
actions
cabinet. sure there is no moisture
in it.
Abrasive media worn. Replace abrasive
Inadequate speed or in
media.
Pressure too low.
Increase inlet pressure
inefficisiency of blast.
and make sure control
valve is fully opened.
Static electrcity
Dry weather conditions
Leave the item being
cleaned on the grating
6