20-Inch B&W Monitor
AMM20
If the monitor will be used in a well lit area, set the
DC REST
(DC
Restoration) switch to the
ON
position. Set it to the
OFF
position if the
monitor is used in a low light situation.
If you plan to loop the video out to another monitor, connect a cable to the
Video Out
BNC and route it to the
Video In
of the second monitor. Up to
three monitors can be connected using the loop-through feature.
NOTE:
Do NOT attach a cable to the
Video Out
unless it is
connected to the
Video In
of another device. Attaching a cable to
the
Video Out
deactivates the termination and will cause poor
quality video unless the other end of the cable is attached to
another device.
5
Figure 5 – Multiple monitor connection
Connect the power cord to the power outlet.
Содержание AMM20
Страница 8: ...AMM20 20 Inch B W Monitor...
Страница 14: ...AMM20 20 Inch B W Monitor 6...
