5
Two beeps confirm that the code has been
accepted.
The Master User Code is also needed to
programme other User Codes into the system.
For example, to programme in a new User
Code: enter the Master User Code, press 8
(Code), then the user number (say 2),
5678 8 2 4321
.
USER 2 is now 4321.
Once a user has been programmed with a
User Code the user can re-programme their
own code, ie entering:
4321 8 2 9876
would re-programme user 2 as 9876.
Any user may delete their own code by:
entering their code + 8 + User No +
√
, ie:
9876 8 2
√
User 2 is now deleted.
The Master User Code can reprogramme or
delete any user.
CHIME FACILITY [9]
CHIME FACILITY [9]
Any zone can be programmed to give a Chime
(two beeps from the keypad and internal
sounder) when you activate the zone. To do
this enter your code, press
9
(Chime) then the
zone(s) you want to Chime. Press the
√√
key to
finish or wait for a confirmation beep.
To remove all zones from the Chime list, enter
your code and press the 9 (Chime) key, wait
for a confirmation beep then press the
√
key.
VIEWING THE LOG [0]
VIEWING THE LOG [0]
The last 16 zone activations can be viewed by
entering your code then pressing the
0
key.
The most recent zones activations are
