ADE M703600, Руководство по эксплуатации

Страница: 7 / 12

M703600-01-210817-Rev008-UM-en 7
Once Backlight is set on, scale never turns off backlight,
independent from stability.
Press to exit the Settings Mode.
Trouble-shooting & Cleaning
Symptom Possible reasons Possible actions
blank display by pressing
On/Off
discharged battery
replace battery
defective battery
defective ON/OFF key press ON/OFF key for long
no action taken after TARE or
HOLD is activated
defective TARE or HOLD key clean TARE or HOLD key
unstable readings
scale in motion stabilize the load and scale
scale is damped dry the scale
dust on PCB board clean PCB board
Scale does not show zero
without load
unstable power system increase warm-up time
load-cell stressed too much or
for too long
hang the scale during storage
substantial error in weight
result
Scale has been loaded before
zero setting process has been
finished keep the scale unloaded and
start procedure again and wait
for zero setting before loading
re-calibration needed re-calibrate the scale
improper unit switch to proper unit
Cleaning:
For cleaning just use a damp cloth or common disinfection products.
Do not use any aggressive cleaning fluids.
Warranty – Liability:
ADE will repair or replace this product within a period of 1 year from date of delivery applying to
defects occurred due to poor material or workmanship (presentation of invoice is necessary). All
moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty
does not include natural wear, damages caused by incorrect or negligent handling, overuse or
unsuitable or improper storage. The cost of transport will be borne by the customer should the
equipment be located anywhere other then the customer’s premises. In the event of transport
damage, claims under warranty can be accepted subject to using the complete original packaging and
the equipment secured the way it was packed and secured originally. All the packaging should
therefore be retained.
Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively
by ADE to do so.
To make sure the scale is fully reliable at any time do check the scale in regular intervals by using
tested weights.