ADE M 30010, Руководство по эксплуатации

Страница: 7 / 12

050100-Rev000-M20011 6
Cleaning, Maintenance and Re-approval
Cleaning
Before cleaning make sure the scale has been disconnected from the socket.
For cleaning just use a damp cloth or common disinfection products.
Do not use any aggressive cleaning fluids.
Make sure no water or cleaning fluid penetrates the scale.
Service
Display indication
Lo Recharge the power-pack by connecting the mains adapter to the display.
Display indication ErrL Check correct positioning of the scale (see chapter installation & use of scale)
and make sure the scale is completely unloaded.
Display indication Err Function test does not automatically lead to `0.00´. Try zero setting key. If
display still indicates Err the scale needs calibration. Please contact your local
dealer or service partner.
Display indication ErrP Severe failure of weighing system. Please contact your local dealer or service
partner.
Safety instructions
Do NOT use the scale
•
If the mains adapter shows visible damages
•
If mains adapter is not working properly
•
After long storage in humid places
In those cases contact your local dealer or service partner.
Storage and Transport
Keep all original parts and pieces for an eventual sending back of the scale in order to avoid any
possible damage during transport which automatically leads to no warranty.
Disconnect all cables before transport to avoid unnecessary damages.
Warranty – Liability
ADE will repair or replace this product within a period of 2 years from date of delivery applying to
defects occurred due to poor material or workmanship (presentation of invoice is necessary). All
moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty
does not include natural wear, damages caused by incorrect or negligent handling, overuse or
unsuitable or improper storage. The cost of transport will be borne by the customer should the
equipment be located anywhere other then the customer’s premises. In the event of transport
damage, claims under warranty can be accepted subject to using the complete original packaging and
the equipment secured the way it was packed and secured originally. All the packaging should
therefore be retained.
Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively
by ADE to do so.
Customers abroad are kindly requested to contact their local dealer for any warranty claim, customer
service and spare parts.