ADE Captiv8-20, Руководство по эксплуатации, Страница: 8 / 28

To reset by Remote PC reset
Your engineer will have given you instructions on how
to request a Remote PC reset.
When the Remote PC reset is received by your
system, the keypad will display the ‘System Reset’
message for a few seconds. It will then either revert to
the time and date display, or display the number of
faults which still exist - this is a fault lockout.
Fault Lockout
After resetting the system the keypad display will
either display the ‘System Reset’ message, or it will
show a count of the faults which still exist. This is
called fault lockout.
These faults must be cleared before the system can
return to Unset mode.
To see a list of the faults press the key. The
keypad will display each fault for 5 seconds. When all
of the faults have been displayed it will again display a
count of the faults. It will often be necessary to call out
the engineer in order to clear these faults.
If you can, clear the faults until the display shows no
faults.
8
Operating instructions
System Unset by
Richard
Faults: 1
ENTER to View
ENTER