Maintenance Section
Compressor Welder Generator
9
6
Maintenance Section
6.1
General Hazard Information
Perform all maintenance unless otherwise specified as
follows:
The vehicle parked on level ground.
The engine and CWG stopped.
The start switch key off and the key removed.
All disconnect switches locked out and a Do Not
Start Tag applied.
Pressure relieved in the system which is to be
serviced.
All other external energy sources disconnected
from the machine.
6.1.1
Oils & Coolant
6.1.2
Crushing & Cutting Prevention
Support equipment and attachments properly when
working beneath them. Never attempt adjustments
while the machine is moving or the engine is
running unless otherwise specified.
Stay clear of all rotating and moving parts.
NOTICE
You must read and understand the warnings
and instructions contained in the Safety
Section of this manual, before performing any
maintenance procedures.
Unintended machine movement may result in
personal injury or death. Before performing
maintenance on this machine ensure it has
been isolated in accordance with mine site
and manufacturer procedures and a Do Not
Start Tag has been applied in the appropriate
location on the machine.
Disconnection of hoses and removal of
supporting pins and bolts of the service
vehicle may result in unintended machine
movement and/or release of stored energy.
Personal injury or death may result. Before
disassembly of any components of the
service vehicle ensure that stored energy has
been
relieved
and
components
are
chocked/blocked
to
prevent
unintended
movement.
Oils and coolant may be hot and under
pressure. Before serving components on this
vehicle ensure all pressure is relieved in the
system and fluids have been allowed
sufficient time to cool.
