5729
5730
STEP 7
PAGE 6
STEP 8
LOCATE DRAWER
Fittings you will need in this step:
CONGRATULATIONS YOUR UNIT IS COMPLETE
jj
LOCATE FEET TOWARDS
THE CORNERS FOR MORE
STABILITY. MARK POSITION
WITH BRADAWL FIRST.
THEN SCREW IN TO PLACE.
ff
(x5)
(x10)
ATTACH FEET
LIFT UNIT ONTO FEET( 2 PERSONS ) THEN
Fittings you will need in this step:
(x2)
PULL SLIDING PART OF
DRAWER RUNNERS (ee)
OUT SO THEY ARE FULLY
EXTENDED. THEN PLACE
THE COMPLETED
DRAWER UNIT ON TO
THE RUNNERS SO THAT
THE 2ND SMALL HOLE
FROM THE FRONT
OF THE RUNNER LINES
UP WITH THE HOLE IN
THE SIDES OF THE DRAWER
SECTION. YOU MAY
REQUIRE SOME HELP TO
DO THIS. THEN FROM THE
INSIDE OF THE DRAWER
SCREW (gg) THROUGH SO
THEY ARE ATTACHED.
gg
gg
gg
ENSURE YOU SECURE
THE FEET TO BOTTOM PANEL
THIS IS EDGED IN SILVER.
jj
ff
jj
ff
jj
jj
jj
jj
ff
jj
jj
ff
jj
ff
PLEASE NOTE:TO KEEP YOUR UNIT IN PERFECT CONDITION CLEAN ONLY WITH A SOFT DAMP CLOTH.DO NOT USE
ANY ABRASIVE CHEMICAL CLEANERS. DO NOT SUBJECT YOUR UNIT TO HEAT OR MOISTURE. I E BY
PLACING HOT OR DAMP CUPS ETC ON ANY OF THE SURFACES.
AFTERCARE INSTRUCTIONS, PLEASE READ.
WE RECOMMEND THAT THE UNIT IS LIFTED AND NOT DRAGGED.
