VoiceFinder AP200 VoIP Residential Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 46/
46
[Ethernet Cable Assemble (RJ-45 to RJ-45) Pinout]
In order to connect the gateway with other equipments (i.e. HUB), the RJ-45 to RJ-45
Ethernet Cable is used. The RJ-45 Connector Pin sequence is provided below and the
transferred signal and Pinout specifications are enlisted at the below table.
Figure 4-1:
10Base-T RJ-45 Connector
Table 4-2: Signal and Pinout of Direct Ethernet Cable
RJ-45
Signal
Direction
RJ-45 Pin
1
Tx +
→
1
2
Tx -
→
2
3
Rx +
←
3
4
- -
4
5
- -
5
6
Rx -
←
6
7
- -
7
8
- -
8
1. These specifications are for Ethernet cables connecting the gateway and the HUB.
2.
For gateway to gateway or gateway to PC connection, the Cross Cable must be
used.