AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00
AddPac Technology Proprietary & Documentation
205 - 154
[Table 3-24] SIP Options
Category
Description
Call Transfer Mode
Sets the call transfer mode to basic or attend.
Conference Service
Tag
Enters VoIP tag when using the conference service.
Conference Service
Name
Specifies the name of conference service.
Enable Ping
Enters the firewall address to allow you to check the actual public IP
when this product is used in the NAT/firewall environment.
Media Channel
Sends the RTP session information to hear an in-band ring back tone
from the public network in the NAT/firewall environment.
Min Se
Specifies a session timer value.
Retry Counter
The number of SIP UA retries refers to the number of times that SIP
INVITE will be transmitted when you make a call using AP-VP150. If an
attempt message to SIP INVITE is not received within a specific time
because the network quality is poor or a failure occurs in the network,
AP-VP150 will forward an INVITE message.
The default is 10, and the general setting is “3.”
Remote Party ID
Enable this option for the register message if the user name consists of
characters not numbers.
Route By Auxiliary
Enable this option if an incoming number consists of characters not
numbers.
Set Local Domain
Sends the From/To field in an SIP message to the specified domain not
the IP address.
Signaling Port
The default is 5060. Enable this option to change the value.
User-Register
Enable this option to register a user name consisting of characters not
numbers with the SIP server.